Tips on How to Cut Trees Using a Chainsaw


Chainsaw is one of the equipment needed to bring down a tree safely. For starters, a chainsaw is a portable mechanical saw that has a set of teeth attached to a sturdy rotating chain. Apart from tree cutting, it is used by tree removal companies to carry out other tasks such as bucking, felling, limbing, and pruning. Today, we look at some of the pro tips on how to use this saw to remove a tree from a landscape.

Safety First

You need to purchase protective clothing before you can embarking on cutting the tree. Most of the model of this saw actually comes with this clothing, so you will not have to spend money purchasing it from the store. Other safety gear that you need include protective glasses, steel-capped boots, non-slip gloves, and earplugs to protect your eardrums from damage. If you plan to hire a service provider in this niche, ensure that they wear all the above attire to avoid any regrets doing the road.

Determine the Felling Direction

First, you need to determine the felling direction and clear the path by getting rid of any stumps, uneven ground, and large rocks. The main essence of doing this is to protect the tree from damage especially if you intend to use it for various commercial purposes as well as other neighboring trees. Take time to consider all the directions that the tree is likely to fall to avert nasty surprises. It is also recommendable to cut down the tree as per the felling pattern of other trees in the vicinity.

Create Notch

This is the first things that you need to do as it determines the direction that the tree falls. The first notch, also referred to as a face cut  should be made in the direction that you want the tree to fall.


Make the Top and Bottom Cut

The top cut should be a V-shaped notch and should be made on based on the felling direction. On the other hand, the bottom cut or undercut should also be made on side that you want the tree to fall on. The most important thing to remember is that both cuts should be in line with direction the tree is intend to fall.

Make on More Face Cut

The slice that you get after making this cut should have a watermelon shape. If the bottom section of the cut is less than the initial top cut and the depth of the cut is more than that of the bottom cut, you will be able to swing the tree on either the left or right side after it starts to fall down to prevent collateral damage. This condition is commonly referred to as the Dutchman.

Make the Back Cut

This is the third and final cut that you will on the opposite side of the notch to detach the top part of the tree from the stump. It is recommendable to leave a small hinge to help steer the tree in the right direction as it stumbles down.

Safe Retreat

This refers to the direction that you should run when the tree starts to fall. Professionals recommend retreating 45 degrees on the right or left side of the tree. However, this is dependent on the felling direction. Never ever, move behind the tree as it can change direction unexpected due to various factors such as change of wind direction leading to serious injuries. In addition, you should never turn your back on a falling tree as you won’t be able to know if the tree changes direction.

These are some of the major aspects that you need to keep in mind when felling a tree using a chainsaw. You should never try to carry out this task if you do have the skills, equipment, and a license from the relevant authorizes. Stay safe and cushion yourself from unnecessary expenses by hiring a professional tree cutting company to get the job done correctly and hassle free.

Leave a Comment

Your email address will not be published. Required fields are marked *